Your logo is going to sit in someone’s hand every time their phone hits 20% — so the print has to survive. This guide walks through every power bank custom logo decoration method used in Singapore’s corporate gifting market, what each costs, how long each lasts under daily use, and how to prep artwork so the final units look exactly like the mockup.
Five decoration methods, one decision
Pad print, silkscreen, full-colour UV, laser engraving and doming. Each matches a different body material, logo complexity and budget. By the end of this guide you’ll know exactly which to ask for.
Method 1 — Pad printing (tampography)
Pad printing is the workhorse of the custom power bank industry. A silicone pad picks ink from an etched plate and transfers it onto the curved plastic body of the power bank. The setup is cheap, runs fast, and handles the slight curvature of most power bank shells better than flat-print methods.
Best for
Simple text marks, 1–2 spot-colour logos, and mid-volume runs of 500–5,000 pieces on plastic-bodied power banks.
Cost
Lowest per-unit decoration cost. Setup fees are minimal (SGD 30–80 per colour per position). Unit decoration adds about SGD 0.40–1.20 on top of the bare power bank price.
Durability
Holds up well in normal pocket/bag use but can scuff after 12–18 months of heavy daily handling. For longer-life branding, upgrade to UV print or engraving.
Limitations
Not recommended for gradients, photographic images, or CMYK logos with tight Pantone-matching requirements. Fine detail below 6pt tends to blur.
Method 2 — Full-colour UV printing
UV-curable flatbed printers lay down CMYK (plus white) ink directly onto the power bank surface and cure it instantly with UV light. The result is photographic-quality colour, sharp edges, and a slightly raised tactile finish. It’s the default for any logo with gradients, photo elements or more than two brand colours.
Why procurement teams love UV print
One setup charge covers unlimited colours — you’re no longer paying per-colour screen fees. That means a 4-colour logo costs the same per unit as a 1-colour logo, which flips the math on small and mid-sized orders compared to pad or screen printing.
For any brand identity with a gradient, shadow or photographic element, UV is effectively the only option that preserves the design as intended.
Cost
Slightly higher per-unit than pad print (typically SGD 1.20–2.50 on top of the bare unit price) but no per-colour uplift. Setup is SGD 60–120 regardless of colour count.
Durability
Excellent — UV-cured ink bonds into the surface layer and survives daily pocket use well past 24 months. If you’re choosing between pad print and UV for a gift with long shelf-life expectations, always pick UV.
Method 3 — Laser engraving
Laser engraving is used exclusively on aluminium, stainless or metal-bodied power banks. A focused laser beam removes the anodised surface layer, exposing the base metal underneath. The result is a permanent, slightly recessed mark that looks and feels premium.
Best for
Executive gifting tiers, C-suite appreciation kits, sales kickoff premiums, and anywhere the “premium feel” matters more than colour vibrancy. Choosing the right body material is a decision that starts with choosing the right power bank model, which we cover in our Singapore buyer’s guide.
Cost
Higher than print methods — SGD 2.50–5.00 per unit on top of the (already premium-priced) metal-bodied unit. Setup is minimal because there’s no jig or screen.
Durability
Permanent. The mark is physically etched into the metal surface and cannot wear off. This is the only decoration method that will look identical three years after delivery.
Limitations
Monochrome only (typically silver or matte-grey against the anodised finish). Cannot render colour gradients or CMYK logos.
Method 4 — Silkscreen printing
Silkscreen (sometimes called screen printing) forces ink through a stencilled mesh onto the power bank surface. It’s the classic method for bold, saturated spot-colour logos and gives a slightly thicker ink layer than pad print.
Silkscreen is cost-effective for large runs (2,000+ pieces) where the per-colour screen charge is amortised across many units. For most Singapore corporate gifting runs at 300–1,000 pieces, UV print has largely replaced silkscreen because the setup economics work better at those quantities.
Method 5 — Doming (resin sticker)
A printed vinyl sticker is coated with a clear resin dome that sets with a glass-like finish. The result is a raised, three-dimensional logo badge that reads almost like an enamel pin. Doming works on any flat surface, any body material, and any logo — the print underneath is full colour.
It’s the most visually striking option but also the most fragile: the resin can yellow slightly after 2–3 years of UV exposure, and a hard knock can chip the dome. Reserve it for display-focused premiums or gift-box centrepieces rather than daily-use tools.
Artwork specs: get this right before you quote
File format: vector (AI, EPS, SVG, or high-resolution PDF). Fonts must be outlined / converted to curves.
Colour mode: Pantone spot colours for pad / silkscreen / laser; CMYK for UV print.
Minimum text size: 6pt for pad print, 5pt for UV, 4pt for laser engraving.
Minimum line weight: 0.25pt for pad print, 0.15pt for UV and laser.
Safe margin: keep artwork at least 2mm inside the print area edge to account for jig tolerance.
White ink: specify explicitly if your design has white elements on a dark power bank body — UV printers need to lay a white base layer.
Position, size and placement
The most common placement is a single centred logo on the top face of the power bank. For 10,000 mAh slim models this gives you roughly 50mm × 30mm of usable print area. Larger 20,000 mAh bricks offer up to 70mm × 45mm. If you want a logo on both the top and side, price it as two print positions — each position adds setup and unit cost. For a full comparison of print area sizing against body dimensions and charger specs, see our wireless & PD charger specs companion article.
Side-by-side: which method should you choose?
Simple 1–2 colour logo, budget priority: pad print.
Multi-colour or gradient logo, mid-volume: UV full colour.
Metal-bodied executive gift: laser engraving.
High-volume spot-colour order (2,000+): silkscreen.
Display centrepiece / premium gift-box item: doming.
If you want the honest recommendation: for 80% of Singapore corporate gifting scenarios in 2026, UV full-colour printing on a plastic 10,000 mAh body is the right answer. It handles every logo type, ages well, and its per-unit cost at 500+ pieces is within SGD 1–2 of cheaper methods while looking significantly more polished.
Frequently asked questions
Can you Pantone-match my brand colour exactly?
On pad print and silkscreen, yes — those methods use pre-mixed ink. On UV print, we get very close (typically within a single Pantone shade) using calibrated CMYK profiles, and we run a pre-production sample to sign off the exact hue.
Will the print fade over time?
UV-cured and laser-engraved finishes do not fade under normal use. Pad print can scuff after 12–18 months of heavy daily handling. Doming resin can yellow slightly after 2–3 years of UV exposure.
Can I print on multiple sides of the power bank?
Yes. Each additional print position is priced separately because it’s a new jig setup and a new production pass. Most corporate clients stick with one centred top-face print.
Do you print in white on dark power bank bodies?
Yes. UV printers lay down a white base layer under colour prints on dark bodies to keep the colours vibrant. Specify this at artwork stage so we include it in the quote.
What’s the smallest text you can print legibly?
On UV print, 5pt text is the realistic minimum. On pad print, 6pt. On laser engraving, 4pt. Below those sizes text becomes unreadable and we’ll flag it during proofing.
Get your logo on a power bank this week
Send us your vector artwork and preferred model. We’ll return a free digital mockup with print position, Pantone match and unit cost within one working day.
